Annoying does not even cut it when we start talking about a leaking shower. It’s irritating as it lowers the shower pressure and it’s expensive. A shower set up that has leaks can waste up to 300 litres of water a week on average for a family of four. There are ways to correct this.
The first thing that you would want to see is if the leak is coming from the hot water or cold water valve. Whilst this does not make a difference repair-wise, you might want to do it as soon as possible if it’s the hot water as this can cost you a ton of additional electrical expenses.
Identifying Your Shower’s Leak
Leakiness may only come from two parts as long as you don’t particularly get your fluid pipe system damaged. A leaking shower can show a sign from the shower head or the handle assembly of the fixture.
The problem can be identified as damaged rubber O-rings, seals, damaged sleeves or damaged heads. Even calcium deposits, soap scum and hard water can damage and make your parts more brittle and break much easier.
If there are leakages, the first instinct you might have is to over-compensate the handle and close it as tightly as you can. Whilst this is well-intentioned, it’s better if you take this as a no-no. It can wear off the parts immediately and make the damage worse.
Taking Care of The Leak
Find the shutdown valve for your affected bathroom fixture and turn off the water. If you do not have a separate water line, it’s best to get somebody informed about what you plan to do so nobody turns it on again.
If you have two separate handles for both hot and cold water, the shower will be a compression-type faucet. The leaks will come from a worn-out rubber washer and other moving parts. You need to dismantle these parts first, then replace the washer with a new one.
In the event that your leaking shower is one of those Delta-style ones, what you’ll need are Delta replacement cartridges that replace the entire handle. There are many ways how to do this, but it’s always better to refer to professionals instructions to do so.
A damaged shower head is a little bit more challenging, requiring you to find a security screw, remove the entire shower head and replace the entire head altogether. If you’re unsure how to do it right, contact leaking shower right away.